MSW300Np4 300N WiFi ADSL2+ modem router MSW300Np4

 4 Port Wireless-N ADSL2+ Modem/Router

The MSW300N51P4 is an ADSL2+ Wifi 300N modem/router will support multiple line modes including MER bridge mode.

It provides 4 10/100 LAN Base-T Ethernet jacks . The device provides high-speed ADSL broadband connection to the Internet or Intranet. downlink up to 24 Mbps and uplink up to 1 Mbps.

Works on all networks including Sonic/ATT just set your PVC for your network and off you go.

The device supports WLAN access & it can connect to the Internet through a WLAN AP or WLAN device. It complies with IEEE 802.11, 802.11b/g/n specifications, WEP, WPA, and WPA2 security specifications.

Wireless-N ADSL2+ Router 300Mbps
High speed DSL modem, NAT router and wireless access point in one device providing a one-stop networking solution.

Realtek rtl8676

Downlink up to 24 Mbps & Uplink up to 1 Mbps. Annex A & M

2 x Detachable SMA Antennas

Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards

WiFi Protected Setup (WPS) simplifies setup and operation

1 x ADSL RJ11 port

4 x 10/100Mbps Auto-Negotiation Ethernet LAN ports

Supports 64/128bit WEP, complies with 128 bit WPA (TKIP/AES)

Complies with IEEE 802.11, 802.11b/g/n specifications, WEP, WPA, and WPA2 security specifications.

Built-in DHCP server with automatic dynamic IP address distribution
    Setup On Any Network

 Support 11b/g/n or 11bg etc Mixed wireless modes

 Supports SSID broadcast control and effectively prevent the disclosure of SSID broadcast

 Built-in Network Address conversion (NAT) function which support the virtual server, special application procedure and DMZ host

 Built-in DHCP server, static address assignment

 Supports VPN pass-through

 Support Universal Plug and Play (UPnP), UPnP-compliant data can be passed

 Support dynamic DNS, provide Domain Name Service for dynamic IP address

 Built-in static routing function, build up a special network topology as request

 Support LAN WEB management based on the MAC address, can effectively
restrict LAN computer to access the WEB page

 Support WEB software upgrades

 Support WPS Quick Security Setup

 Integrated switch, provides 4 10/100Mbps LAN Port

Support a maximum wireless transfer rate up to 300Mbps, with the rate adaptive function, it will automatically adjust the wireless transmission rate.

 Support 64/128bit WEP Encryption, WPA-PSK/WPA2-PSK and TKIP/AES etc. To assure the security of the wireless transmission network.
    Check me out
See My Manual /
 MSW300Np4 300N WiFi ADSL2+ modem router MSW300Np4 300N WiFi ADSL2+ modem router

MSW150Np4_icon MSW150Np4

 4 Port Wireless-N ADSL2+ Modem/Router

The MSW150NP4 is an ADSL2+ Wifi 150N modem/router will support multiple line modes including MER bridge mode.

It provides 4 10/100 LAN Base-T Ethernet jacks . The device provides high-speed ADSL broadband connection to the Internet or Intranet. downlink up to 24 Mbps and uplink up to 1 Mbps.

Works on all networks including Sonic/ATT just set your PVC for your network and off you go.

The device supports WLAN access & it can connect to the Internet through a WLAN AP or WLAN device. It complies with IEEE 802.11, 802.11b/g/n specifications, WEP, WPA, and WPA2 security specifications.

Wireless-N ADSL2+ Router 150Mbps
High speed DSL modem, NAT router and wireless access point in one device providing a one-stop networking solution.

Realtek rtl8671, App ver-2.11, SDK ver-1.1.1

Downlink up to 24 Mbps & Uplink up to 1 Mbps. Annex A & M

Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards

WiFi Protected Setup (WPS) simplifies setup and operation

1 x ADSL RJ11 port

4 x 10/100Mbps Auto-Negotiation Ethernet LAN ports

Supports 64/128bit WEP, complies with 128 bit WPA (TKIP/AES)

Complies with IEEE 802.11, 802.11b/g/n specifications, WEP, WPA, and WPA2 security specifications.

Built-in DHCP server with automatic dynamic IP address distribution
    Setup On Any Network

 Support 11b/g/n or 11bg etc Mixed wireless modes

 Supports SSID broadcast control and effectively prevent the disclosure of SSID broadcast

 Built-in Network Address conversion (NAT) function which support the virtual server, special application procedure and DMZ host

 Built-in DHCP server, static address assignment

 Supports VPN pass-through

 Support Universal Plug and Play (UPnP), UPnP-compliant data can be passed

 Support dynamic DNS, provide Domain Name Service for dynamic IP address

 Built-in static routing function, build up a special network topology as request

 Support LAN WEB management based on the MAC address, can effectively
restrict LAN computer to access the WEB page

 Support WEB software upgrades

 Support WPS Quick Security Setup

 Integrated switch, provides 4 10/100Mbps LAN Port

Support a maximum wireless transfer rate up to 150Mbps, with the rate adaptive function, it will automatically adjust the wireless transmission rate.

 Support 64/128bit WEP Encryption, WPA-PSK/WPA2-PSK and TKIP/AES etc. To assure the security of the wireless transmission network.
    Check me out
 /
 MSW150Np4 4 Port Wifi MSW150Np4 4 Port WifiMSW150Np4 4 Port Wifi MSW150Np4 4 Port Wifi

MS51p1_icon MS51p1

 Single Port ADSL2+ 1483 Bridging Modem/Router

The MS51p1 is an ADSL2+ Bridging modem/router & will support multiple line modes including 1483 MER bridge mode as default.

It has 1 10/100 LAN Base-T Ethernet jack & provides high-speed ADSL broadband connection to the Internet or Intranet. downlink up to 24 Mbps and uplink up to 1 Mbps.

Works on all networks including Sonic/ATT just set your PVC for your network and off you go.  0/35 Bridge mode is shipped as default setting.

Single Port ADSL2+ Modem Router
Broadcom Chipset 6332.

Downlink up to 24 Mbps & Uplink up to 1 Mbps. Annex A & M

 ANSI T1.413 issue 2

 VLAN tagging

 Rate Adaptive at 32 Kbps steps

1 x ADSL RJ11 port

1 x 10/100Mbps Auto-Negotiation Ethernet LAN ports

 Interoperable with all major DSLAM equipment

 TR-069 compliant with ACS

Built-in DHCP server with automatic dynamic IP address distribution

 ITU G.994.1 G.992.1(G.DMT) G.992.2(G.LITE) G.992.3(G.DMT.BIS) G.992.5
T1.413, PPPoE, PPPoA, IPoA, MER, Bridging mode

 VPI Range: 0-255, VCI Range: 32-65535, AESA (E.164, DCC, ICD), PVC Support, UNI 3.0 & 3.1 Signaling, Support AAL 5
    Setup On Any Network

 Default Bridge mode set @ 0/35 Bridge mode with Broadcom chip 6332

 Simple plug and play for most networks, including the ATT / Sonic setup

 Built-in Network Address conversion (NAT) function which support the virtual server, special application procedure and DMZ host

 Built-in DHCP server, static address assignment

 Supports VPN pass-through

 Support Universal Plug and Play (UPnP), UPnP-compliant data can be passed

 Support dynamic DNS, provide Domain Name Service for dynamic IP address

 Built-in static routing function, build up a special network topology as request

 Support LAN WEB management based on the MAC address, can effectively
restrict LAN computer to access the WEB page

 Support WEB software upgrades
    Check me out
 See My Manual /  See My Installation Guide
MS51p1 Front MS51p1 Back MS51p1 Side MS51p1 Bottom

MS300Np2RTP_icon MS300Np2RPT

 Range Extender / WISP / Router / AP / Repeater

The MS300Np2RPT featuring a variety of modes and is tailored to fill
whatever role required in your network, it has enough speed and
wireless range to power a complex assortment of devices enabling you
or your customers to create a highly efficient network in no time.

Small enough to fit in your pocket, the MS300Np2RPT is capable of
providing a robust wireless network solution to travelers,
students, WISPs looking to expand their network or fill in the
dead areas of an existing network.

The router/repeater also features wireless protected setup which
allows you to connect a device to the router with a secure 802.11i/AES
connection at the push of a button. The MS300Np2RPT supports the newest
802.11n wireless standard, and features backwards compatibility with
older 802.11b/g standards.

The MS300Np2RPT also has robust QoS features for bandwidth management.

With wireless speeds up to 300Mbps and two 10/100Mbps LAN ports,
the MS300Np2RPT is the perfect choice for extending a network in’
support of WiFi devices and online gaming consoles requiring
high-bandwidth for applications like video streaming, VoIP, and online gaming.

Wifi Range extender, Repeater & AP

 Up to 300N Wifi connections

 WPS enabled

Secure 802.11i/AES

 Backwards compatibility with older 802.11b/g

2 x 10/100Mbps Auto-Negotiation Ethernet LAN ports

 QoS features for bandwidth management

 Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards

Built-in DHCP server with automatic dynamic IP address distribution

 Supports Router, Client, Bridge, Repeater, AP mode, WISP mode

 2T2R MIMO delivers greater throughput at range versus conventional 1T1R

 Easy Setup Assistant provides quick & hassle free installation

 Supports configuration file backup and restore

 18mo Warranty
    Setup On Any Modem/Router

 Turn an existing NON wifi ethernet router “Such as the MS51p1″ into a wireless N access point, instead of buying a new router

 Default Connectivity to other ModemSupply units.

 Extend the range or increase the signal strength of a Wireless-N signal to cover a larger area

 Built-in Network Address conversion (NAT) function which support the virtual server, special application procedure and DMZ host

 Built-in DHCP server, static address assignment

 Eliminate wireless network dead spots or weak signals that result from obstructions such as walls

 Support Universal Plug and Play (UPnP), UPnP-compliant data can be passed

 Support dynamic DNS, provide Domain Name Service for dynamic IP address

 Built-in static routing function, build up a special network topology as request

 Support LAN WEB management based on the MAC address, can effectively
restrict LAN computer to access the WEB page

 Support WEB software upgrades
    Check me out
 See My Manual /  See My Installation Guide
  ModemSupply.com Repeater / WISP